Home > Seagate Barracuda 7200.11 PCB > Seagate Barracuda 7200.11 1.5TB 1500GB ST31500341AS 100512588 100530756 Donor PCB Circuit Board with Firmware Transfer

Please Use Our PCB MatchMaker Below to Find the Right PCB for You!

Select Your Hard Drive Brand to Begin: Seagate Hard Drive PCB Circuit Boards Western Digital WD Hard Drive PCB Circuit Boards Maxtor Hard Drive PCB Circuit Boards Hitachi Hard Drive PCB Circuit Boards Samsung Hard Drive PCB Circuit Boards Other Brands

Seagate Barracuda 7200.11 1.5TB 1500GB ST31500341AS 100512588 100530756 Donor PCB Circuit Board with Firmware Transfer

Seagate Barracuda 7200.11 1.5TB 1500GB ST31500341AS 100512588 100530756 Donor PCB Circuit Board with Firmware Transfer
Item# seagate-barracuda-720011-1000gb-ST31500341AS
US$49.99

Product Description

This is the PCB board (circuit board) of a Seagate Barracuda 7200.11 Hard Drive

ESSENTIAL INFORMATION

Item Information

The Process

Model: ST31500341AS
Firmware: Please read description to the right -->
Capacity: 1500GB / 1.5TB
Board #: 100512588 or 100530756

Not a Match? Try our PCB Finder
  1. Locate the number imprinted on the edge of your PCB board (Circled red in the picture), it must say 100512588 or 100530756.
  2. Our PCB board has the 100512588 number, it is compatible with 100530756 boards as well.
  3. If this is a match, then we can make a clone of your board.

    4. To make the clone, we will need you to fill this form, then ship your DAMAGED PCB (circuit board) to us. We will then copy the information from your PCB onto our PCB. We will then ship the working cloned PCB back to you. (To find out more, please read our article by clicking here.)

    This process is necessary to ensure compatibility, it seems that newer Seagate boards have MANY different firmwares (even when they have the same firmware on the label), and is therefore very hard to match.

When to buy this item:

A common problem with Seagate Barracuda 7200.11 drives is that it would suddenly stop being recognized by the computer, or be recognized as 0MBs. Normally, there is a decent chance that it could be the PCB at fault, but with 7200.11 drives, it usually is NOT the PCB, but a firmware problem instead. A data recovery professional is a better choice.

We recommend buying this item when you are sure it is the PCB. For example, if there was a power surge, or some components are obviously burnt, or the wrong power adapter was used to power up the drive. If the drive will not spin up at all, and wasn't dropped, chances of success with replacing the PCB are quite good.

There are no refunds with this purchase, so if you would like to describe the specific symptoms to us, please Contact us through our online form or at info@pcbsolution.com, we will try our best to reply within 12 hours.

Item Includes: circuit board, firmware transfer and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the hard drive PCB board, not the whole hard drive.
2. All hard drive PCB boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong hard drive PCB board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
 Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!