Maxtor DiamondMax Plus 9 ATA PCB

Item# maxtor-diamondmax-plus-9-ata-hard-drive-pcb
Maxtor DiamondMax Plus 9 60GB 60 GB 6Y060P0 YAR41BW0 040111300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060P0
Code: YAR41BW0
Capacity: 60GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060P0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-27
Maxtor DiamondMax Plus 9 60GB 60 GB 6Y060L0 YAR41BW0 040111300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060L0
Code: YAR41BW0
Capacity: 60GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-24
Maxtor DiamondMax Plus 9 60GB 6Y060P YAR41BW0 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060P
Code: YAR41BW0
Capacity: 60GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060P".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-28
Maxtor DiamondMax Plus 9 60GB 6Y060L YAR41BW0 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060L
Code: YAR41BW0
Capacity: 60GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060L".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-25
Maxtor DiamondMax Plus 9 80GB 80 GB 6Y080P0 YAR41BW0 040111300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080P0
Code: YAR41BW0
Capacity: 80GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080P0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-34
Maxtor DiamondMax Plus 9 80GB 80 GB 6Y080L0 YAR41BW0 040111300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080L0
Code: YAR41BW0
Capacity: 80GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-31
Maxtor DiamondMax Plus 9 80GB 6Y080P YAR41BW0 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080P
Code: YAR41BW0
Capacity: 80GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080P".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-35
Maxtor DiamondMax Plus 9 80GB 6Y080L YAR41BW0 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080L
Code: YAR41BW0
Capacity: 80GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080L".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-32
Maxtor DiamondMax Plus 9 120GB 120 GB 6Y120P0 YAR41BW0 040111300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120P0
Code: YAR41BW0
Capacity: 120GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120P0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-4
Maxtor DiamondMax Plus 9 120GB 120 GB 6Y120L0 YAR41BW0 040111300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120L0
Code: YAR41BW0
Capacity: 120GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-1
Maxtor DiamondMax Plus 9 120GB 6Y120P YAR41BW0 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120P
Code: YAR41BW0
Capacity: 120GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120P".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-5
Maxtor DiamondMax Plus 9 120GB 6Y120L YAR41BW0 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120L
Code: YAR41BW0
Capacity: 120GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120L".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-2
Maxtor DiamondMax Plus 9 160GB 160 GB 6Y160P0 YAR41BW0 040111300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160P0
Code: YAR41BW0
Capacity: 160GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160P0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-10
Maxtor DiamondMax Plus 9 160GB 160 GB 6Y160L0 YAR41BW0 040111300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160L0
Code: YAR41BW0
Capacity: 160GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-7
Maxtor DiamondMax Plus 9 160GB 6Y160P YAR41BW0 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160P
Code: YAR41BW0
Capacity: 160GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160P".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-11
Maxtor DiamondMax Plus 9 160GB 6Y160L YAR41BW0 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160L
Code: YAR41BW0
Capacity: 160GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160L".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-8
Maxtor DiamondMax Plus 9 200GB 200 GB 6Y200P0 YAR41BW0 040111300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200P0
Code: YAR41BW0
Capacity: 200GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200P0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-16
Maxtor DiamondMax Plus 9 200GB 200 GB 6Y200L0 YAR41BW0 040111300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200L0
Code: YAR41BW0
Capacity: 200GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-13
Maxtor DiamondMax Plus 9 200GB 6Y200P YAR41BW0 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200P
Code: YAR41BW0
Capacity: 200GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200P".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-17
Maxtor DiamondMax Plus 9 200GB 6Y200L YAR41BW0 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200L
Code: YAR41BW0
Capacity: 200GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200L".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-14
Maxtor DiamondMax Plus 9 250GB 250 GB 6Y250L0 YAR41BW0 040111300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250L0
Code: YAR41BW0
Capacity: 250GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-19
Maxtor DiamondMax Plus 9 250GB 250 GB 6Y250P0 YAR41BW0 040111300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250P0
Code: YAR41BW0
Capacity: 250GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250P0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-22
Maxtor DiamondMax Plus 9 250GB 6Y250L YAR41BW0 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250L
Code: YAR41BW0
Capacity: 250GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250L".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-20
Maxtor DiamondMax Plus 9 250GB 6Y250P YAR41BW0 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250P
Code: YAR41BW0
Capacity: 250GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250P".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-37
Maxtor DiamondMax Plus 9 60GB 6Y060PO YAR41BWO YAR41BW0 6Y060P0

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060PO / 6Y060P0
Code: YAR41BWO / YAR41BW0
Capacity: 60GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060PO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-29
Maxtor DiamondMax Plus 9 60GB 6Y060LO YAR41BWO YAR41BW0 6Y060L0

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060LO / 6Y060L0
Code: YAR41BWO / YAR41BW0
Capacity: 60GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060LO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-26
Maxtor DiamondMax Plus 9 80GB 6Y080PO YAR41BWO YAR41BW0 6Y080P0

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080PO / 6Y080P0
Code: YAR41BWO / YAR41BW0
Capacity: 80GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080PO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-36
Maxtor DiamondMax Plus 9 80GB 6Y080LO YAR41BWO YAR41BW0 6Y080L0

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080LO / 6Y080L0
Code: YAR41BWO / YAR41BW0
Capacity: 80GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080LO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-33
Maxtor DiamondMax Plus 9 120GB 6Y120PO YAR41BWO YAR41BW0 6Y120P0

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120PO / 6Y120P0
Code: YAR41BWO / YAR41BW0
Capacity: 120GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120PO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-6
Maxtor DiamondMax Plus 9 120GB 6Y120LO YAR41BWO YAR41BW0 6Y120L0

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120LO / 6Y120L0
Code: YAR41BWO / YAR41BW0
Capacity: 120GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120LO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-3
Maxtor DiamondMax Plus 9 160GB 6Y160PO YAR41BWO YAR41BW0 6Y160P0

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160PO / 6Y160P0
Code: YAR41BWO / YAR41BW0
Capacity: 160GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160PO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-12
Maxtor DiamondMax Plus 9 160GB 6Y160LO YAR41BWO YAR41BW0 6Y0160L0

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160LO / 6Y160L0
Code: YAR41BWO / YAR41BW0
Capacity: 160GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160LO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-9
Maxtor DiamondMax Plus 9 200GB 6Y200PO YAR41BWO YAR41BW0 6Y200P0

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200PO / 6Y200P0
Code: YAR41BWO / YAR41BW0
Capacity: 200GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200PO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-18
Maxtor DiamondMax Plus 9 200GB 6Y200LO YAR41BWO YAR41BW0 6Y200L0

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200LO / 6Y200L0
Code: YAR41BWO / YAR41BW0
Capacity: 200GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200LO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-15
Maxtor DiamondMax Plus 9 250GB 6Y250LO YAR41BWO YAR41BW0 6Y250L0

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250LO / 6Y250L0
Code: YAR41BWO / YAR41BW0
Capacity: 250GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250LO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-21
Maxtor DiamondMax Plus 9 250GB 6Y250PO YAR41BWO YAR41BW0 6Y250P0

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250PO / 6Y250P0
Code: YAR41BWO / YAR41BW0
Capacity: 250GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250PO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-23
Maxtor DiamondMax Plus 9 250GB 250 GB 6Y250PO YAR41BWO Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250PO
Code: YAR41BWO
Capacity: 250GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250PO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-50
Maxtor DiamondMax Plus 9 60GB 60 GB 6Y060LO YAR41BWO Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060LO
Code: YAR41BWO
Capacity: 60GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060LO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-61
Maxtor DiamondMax Plus 9 60GB 60 GB 6Y060PO YAR41BWO Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060PO
Code: YAR41BWO
Capacity: 60GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060PO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-60
Maxtor DiamondMax Plus 9 80GB 80 GB 6Y080LO YAR41BWO Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080LO
Code: YAR41BWO
Capacity: 80GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080LO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-59
Maxtor DiamondMax Plus 9 80GB 80 GB 6Y080PO YAR41BWO Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080PO
Code: YAR41BWO
Capacity: 80GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080PO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-58
Maxtor DiamondMax Plus 9 120GB 120 GB 6Y120LO YAR41BWO Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120LO
Code: YAR41BWO
Capacity: 120GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120LO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-57
Maxtor DiamondMax Plus 9 120GB 120 GB 6Y120PO YAR41BWO Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120PO
Code: YAR41BWO
Capacity: 120GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120PO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-56
Maxtor DiamondMax Plus 9 160GB 160 GB 6Y160LO YAR41BWO Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160LO
Code: YAR41BWO
Capacity: 160GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160LO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-55
Maxtor DiamondMax Plus 9 160GB 160 GB 6Y160PO YAR41BWO Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160PO
Code: YAR41BWO
Capacity: 160GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160PO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-54
Maxtor DiamondMax Plus 9 200GB 200 GB 6Y200LO YAR41BWO Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200LO
Code: YAR41BWO
Capacity: 200GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200LO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-53
Maxtor DiamondMax Plus 9 200GB 200 GB 6Y200PO YAR41BWO Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200PO
Code: YAR41BWO
Capacity: 200GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200PO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-52
Maxtor DiamondMax Plus 9 250GB 250 GB 6Y250LO YAR41BWO Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250LO
Code: YAR41BWO
Capacity: 250GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. Make sure there is NO chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250LO".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-plus-9-51
Maxtor DiamondMax Plus 9 60GB 60 GB 6Y060L0 YAR41BW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060L0
Code: YAR41BW0
Capacity: 60GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060L0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200
This item is currently out of stock!
Maxtor DiamondMax Plus 9 60GB 60 GB 6Y060L0 YAR41BW0 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060L0
Code: YAR41BW0
Capacity: 60GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060L0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500
This item is currently out of stock!
Maxtor DiamondMax Plus 9 60GB 60 GB 6Y060L0 YAR41BW0 Hard Drive PCB + ROM

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060L0
Code: YAR41BW0
Capacity: 60GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is a chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9-13091300
Maxtor DiamondMax Plus 9 60GB 60 GB 6Y060PO YAR41BWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060PO
Code: YAR41BWO
Capacity: 60GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060PO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200-2
This item is currently out of stock!
Maxtor DiamondMax Plus 9 80GB 80 GB 6Y080L0 YAR41BW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080L0
Code: YAR41BW0
Capacity: 80GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080L0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200-3
This item is currently out of stock!
Maxtor DiamondMax Plus 9 80GB 80 GB 6Y080PO YAR41BWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080PO
Code: YAR41BWO
Capacity: 80GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080PO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200-4
This item is currently out of stock!
Maxtor DiamondMax Plus 9 120GB 120 GB 6Y120L0 YAR41BW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120L0
Code: YAR41BW0
Capacity: 120GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120L0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200-5
This item is currently out of stock!
Maxtor DiamondMax Plus 9 120GB 120 GB 6Y120PO YAR41BWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120PO
Code: YAR41BWO
Capacity: 120GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120PO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200-6
This item is currently out of stock!
Maxtor DiamondMax Plus 9 160GB 160 GB 6Y160L0 YAR41BW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160L0
Code: YAR41BW0
Capacity: 160GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160L0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200-7
This item is currently out of stock!
Maxtor DiamondMax Plus 9 160GB 160 GB 6Y160PO YAR41BWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160PO
Code: YAR41BWO
Capacity: 160GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160PO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200-8
This item is currently out of stock!
Maxtor DiamondMax Plus 9 200GB 200 GB 6Y200L0 YAR41BW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200L0
Code: YAR41BW0
Capacity: 200GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200L0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200-9
This item is currently out of stock!
Maxtor DiamondMax Plus 9 200GB 200 GB 6Y200PO YAR41BWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200PO
Code: YAR41BWO
Capacity: 200GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200PO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200-19
This item is currently out of stock!
Maxtor DiamondMax Plus 9 250GB 250 GB 6Y250L0 YAR41BW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250L0
Code: YAR41BW0
Capacity: 250GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250L0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200-11
This item is currently out of stock!
Maxtor DiamondMax Plus 9 250GB 250 GB 6Y250PO YAR41BWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250PO
Code: YAR41BWO
Capacity: 250GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250PO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200-12
This item is currently out of stock!
Maxtor DiamondMax Plus 9 60GB 60 GB 6Y060L0 YAR41VW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060L0
Code: YAR41VW0
Capacity: 60GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060L0".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200-50
This item is currently out of stock!
Maxtor DiamondMax Plus 9 60GB 60 GB 6Y060PO YAR41VWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060PO
Code: YAR41VWO
Capacity: 60GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060PO".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200-52
This item is currently out of stock!
Maxtor DiamondMax Plus 9 80GB 80 GB 6Y080L0 YAR41VW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080L0
Code: YAR41VW0
Capacity: 80GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080L0".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200-53
This item is currently out of stock!
Maxtor DiamondMax Plus 9 80GB 80 GB 6Y080PO YAR41VWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080PO
Code: YAR41VWO
Capacity: 80GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080PO".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200-54
This item is currently out of stock!
Maxtor DiamondMax Plus 9 120GB 120 GB 6Y120L0 YAR41VW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120L0
Code: YAR41VW0
Capacity: 120GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120L0".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200-55
This item is currently out of stock!
Maxtor DiamondMax Plus 9 120GB 120 GB 6Y120PO YAR41VWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120PO
Code: YAR41VWO
Capacity: 120GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120PO".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200-56
This item is currently out of stock!
Maxtor DiamondMax Plus 9 160GB 160 GB 6Y160L0 YAR41VW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160L0
Code: YAR41VW0
Capacity: 160GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160L0".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200-57
This item is currently out of stock!
Maxtor DiamondMax Plus 9 160GB 160 GB 6Y160PO YAR41VWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160PO
Code: YAR41VWO
Capacity: 160GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160PO".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200-58
This item is currently out of stock!
Maxtor DiamondMax Plus 9 200GB 200 GB 6Y200L0 YAR41VW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200L0
Code: YAR41VW0
Capacity: 200GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200L0".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200-59
This item is currently out of stock!
Maxtor DiamondMax Plus 9 200GB 200 GB 6Y200PO YAR41VWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200PO
Code: YAR41VWO
Capacity: 200GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200PO".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200-69
This item is currently out of stock!
Maxtor DiamondMax Plus 9 250GB 250 GB 6Y250L0 YAR41VW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250L0
Code: YAR41VW0
Capacity: 250GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250L0".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200-61
This item is currently out of stock!
Maxtor DiamondMax Plus 9 250GB 250 GB 6Y250PO YAR41VWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250PO
Code: YAR41VWO
Capacity: 250GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250PO".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-99040110200-62
This item is currently out of stock!
Maxtor DiamondMax Plus 9 60GB 60 GB 6Y060PO YAR41BWO 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060PO
Code: YAR41BWO
Capacity: 60GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060PO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500-2
This item is currently out of stock!
Maxtor DiamondMax Plus 9 80GB 80 GB 6Y080L0 YAR41BW0 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080L0
Code: YAR41BW0
Capacity: 80GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080L0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500-4
This item is currently out of stock!
Maxtor DiamondMax Plus 9 80GB 80 GB 6Y080PO YAR41BWO 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080PO
Code: YAR41BWO
Capacity: 80GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080PO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500-6
This item is currently out of stock!
Maxtor DiamondMax Plus 9 120GB 120 GB 6Y120L0 YAR41BW0 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120L0
Code: YAR41BW0
Capacity: 120GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120L0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500-8
This item is currently out of stock!
Maxtor DiamondMax Plus 9 120GB 120 GB 6Y120PO YAR41BWO 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120PO
Code: YAR41BWO
Capacity: 120GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120PO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500-10
This item is currently out of stock!
Maxtor DiamondMax Plus 9 160GB 160 GB 6Y160L0 YAR41BW0 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160L0
Code: YAR41BW0
Capacity: 160GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160L0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500-12
This item is currently out of stock!
Maxtor DiamondMax Plus 9 160GB 160 GB 6Y160PO YAR41BWO 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160PO
Code: YAR41BWO
Capacity: 160GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160PO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500-14
This item is currently out of stock!
Maxtor DiamondMax Plus 9 200GB 200 GB 6Y200L0 YAR41BW0 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200L0
Code: YAR41BW0
Capacity: 200GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200L0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500-16
This item is currently out of stock!
Maxtor DiamondMax Plus 9 200GB 200 GB 6Y200PO YAR41BWO 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200PO
Code: YAR41BWO
Capacity: 200GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200PO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500-18
This item is currently out of stock!
Maxtor DiamondMax Plus 9 250GB 250 GB 6Y250L0 YAR41BW0 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250L0
Code: YAR41BW0
Capacity: 250GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250L0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500-20
This item is currently out of stock!
Maxtor DiamondMax Plus 9 250GB 250 GB 6Y250PO YAR41BWO 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250PO
Code: YAR41BWO
Capacity: 250GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250PO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500-22
This item is currently out of stock!
Maxtor DiamondMax Plus 9 60GB 60 GB 6Y060L0 YAR41VW0 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060L0
Code: YAR41VW0
Capacity: 60GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060L0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500-50
This item is currently out of stock!
Maxtor DiamondMax Plus 9 60GB 60 GB 6Y060PO YAR41VWO 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060PO
Code: YAR41VWO
Capacity: 60GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060PO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500-52
This item is currently out of stock!
Maxtor DiamondMax Plus 9 80GB 80 GB 6Y080L0 YAR41VW0 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080L0
Code: YAR41VW0
Capacity: 80GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080L0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500-54
This item is currently out of stock!
Maxtor DiamondMax Plus 9 80GB 80 GB 6Y080PO YAR41VWO 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080PO
Code: YAR41VWO
Capacity: 80GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080PO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500-56
This item is currently out of stock!
Maxtor DiamondMax Plus 9 120GB 120 GB 6Y120L0 YAR41VW0 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120L0
Code: YAR41VW0
Capacity: 120GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120L0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500-58
This item is currently out of stock!
Maxtor DiamondMax Plus 9 120GB 120 GB 6Y120PO YAR41VWO 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120PO
Code: YAR41VWO
Capacity: 120GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120PO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500-60
This item is currently out of stock!
Maxtor DiamondMax Plus 9 160GB 160 GB 6Y160L0 YAR41VW0 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160L0
Code: YAR41VW0
Capacity: 160GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160L0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500-62
This item is currently out of stock!
Maxtor DiamondMax Plus 9 160GB 160 GB 6Y160PO YAR41VWO 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160PO
Code: YAR41VWO
Capacity: 160GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160PO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500-64
This item is currently out of stock!
Maxtor DiamondMax Plus 9 200GB 200 GB 6Y200L0 YAR41VW0 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200L0
Code: YAR41VW0
Capacity: 200GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200L0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500-66
This item is currently out of stock!
Maxtor DiamondMax Plus 9 200GB 200 GB 6Y200PO YAR41VWO 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200PO
Code: YAR41VWO
Capacity: 200GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200PO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500-68
This item is currently out of stock!
Maxtor DiamondMax Plus 9 250GB 250 GB 6Y250L0 YAR41VW0 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250L0
Code: YAR41VW0
Capacity: 250GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250L0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500-70
This item is currently out of stock!
Maxtor DiamondMax Plus 9 250GB 250 GB 6Y250PO YAR41VWO 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250PO
Code: YAR41VWO
Capacity: 250GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250PO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-991500-72
This item is currently out of stock!
Maxtor DiamondMax Plus 9 80GB 80 GB 6Y080L0 YAR41BW0 Hard Drive PCB + ROM

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080L0
Code: YAR41BW0
Capacity: 80GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is a chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9-13091300-4
Maxtor DiamondMax Plus 9 120GB 120 GB 6Y120L0 YAR41BW0 Hard Drive PCB + ROM

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120L0
Code: YAR41BW0
Capacity: 120GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is a chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9-13091300-7
Maxtor DiamondMax Plus 9 160GB 160 GB 6Y160L0 YAR41BW0 Hard Drive PCB + ROM

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160L0
Code: YAR41BW0
Capacity: 160GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is a chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9-13091300-10
Maxtor DiamondMax Plus 9 200GB 200 GB 6Y200L0 YAR41BW0 Hard Drive PCB + ROM

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200L0
Code: YAR41BW0
Capacity: 200GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is a chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9-13091300-13
Maxtor DiamondMax Plus 9 250GB 250 GB 6Y250L0 YAR41BW0 Hard Drive PCB + ROM

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250L0
Code: YAR41BW0
Capacity: 250GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. Make sure there is a chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9-13091300-16
Maxtor DiamondMax Plus 9 60GB 60 GB 6Y060L0 YAR41VW0 Hard Drive PCB + ROM

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060L0
Code: YAR41VW0
Capacity: 60GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. Make sure there is a chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9-13091300-25
Maxtor DiamondMax Plus 9 80GB 80 GB 6Y080L0 YAR41VW0 Hard Drive PCB + ROM

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080L0
Code: YAR41VW0
Capacity: 80GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. Make sure there is a chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9-13091300-26
Maxtor DiamondMax Plus 9 120GB 120 GB 6Y120L0 YAR41VW0 Hard Drive PCB + ROM

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120L0
Code: YAR41VW0
Capacity: 120GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. Make sure there is a chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9-13091300-27
Maxtor DiamondMax Plus 9 160GB 160 GB 6Y160L0 YAR41VW0 Hard Drive PCB + ROM

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160L0
Code: YAR41VW0
Capacity: 160GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. Make sure there is a chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9-13091300-28
Maxtor DiamondMax Plus 9 200GB 200 GB 6Y200L0 YAR41VW0 Hard Drive PCB + ROM

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200L0
Code: YAR41VW0
Capacity: 200GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. Make sure there is a chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9-13091300-29
Maxtor DiamondMax Plus 9 250GB 250 GB 6Y250L0 YAR41VW0 Hard Drive PCB + ROM

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250L0
Code: YAR41VW0
Capacity: 250GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. Make sure there is a chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9-13091300-30
Maxtor DiamondMax Plus 9 60GB 60 GB 6Y060L0 YAR41KW0 Hard Drive PCB + ROM

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060L0
Code: YAR41KW0
Capacity: 60GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41KW0".
  4. Make sure there is a chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9-13091300-50
Maxtor DiamondMax Plus 9 80GB 80 GB 6Y080L0 YAR41KW0 Hard Drive PCB + ROM

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080L0
Code: YAR41KW0
Capacity: 80GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41KW0".
  4. Make sure there is a chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9-13091300-54
Maxtor DiamondMax Plus 9 120GB 120 GB 6Y120L0 YAR41KW0 Hard Drive PCB + ROM

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120L0
Code: YAR41KW0
Capacity: 120GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41KW0".
  4. Make sure there is a chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9-13091300-57
Maxtor DiamondMax Plus 9 160GB 160 GB 6Y160L0 YAR41KW0 Hard Drive PCB + ROM

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160L0
Code: YAR41KW0
Capacity: 160GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41KW0".
  4. Make sure there is a chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9-13091300-60
Maxtor DiamondMax Plus 9 200GB 200 GB 6Y200L0 YAR41KW0 Hard Drive PCB + ROM

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200L0
Code: YAR41KW0
Capacity: 200GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41KW0".
  4. Make sure there is a chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9-13091300-63
Maxtor DiamondMax Plus 9 250GB 250 GB 6Y250L0 YAR41KW0 Hard Drive PCB + ROM

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250L0
Code: YAR41KW0
Capacity: 250GB
Main Chip #: 040111300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41KW0".
  4. Make sure there is a chip in the location of the yellow circle.
  5. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250L0".
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9-13091300-76
Maxtor DiamondMax Plus 9 60GB 60 GB 6Y060P0 YAR41BW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060P0
Code: YAR41BW0
Capacity: 60GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060P0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001
This item is currently out of stock!
Maxtor DiamondMax Plus 9 60GB 60 GB 6Y060LO YAR41BWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060LO
Code: YAR41BWO
Capacity: 60GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060LO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001-2
This item is currently out of stock!
Maxtor DiamondMax Plus 9 80GB 80 GB 6Y080P0 YAR41BW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080P0
Code: YAR41BW0
Capacity: 80GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080P0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001-3
This item is currently out of stock!
Maxtor DiamondMax Plus 9 80GB 80 GB 6Y080LO YAR41BWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080LO
Code: YAR41BWO
Capacity: 80GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080LO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001-4
This item is currently out of stock!
Maxtor DiamondMax Plus 9 120GB 120 GB 6Y120P0 YAR41BW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120P0
Code: YAR41BW0
Capacity: 120GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120P0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001-5
This item is currently out of stock!
Maxtor DiamondMax Plus 9 120GB 120 GB 6Y120LO YAR41BWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120LO
Code: YAR41BWO
Capacity: 120GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120LO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001-6
This item is currently out of stock!
Maxtor DiamondMax Plus 9 160GB 160 GB 6Y160P0 YAR41BW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160P0
Code: YAR41BW0
Capacity: 160GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160P0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001-7
This item is currently out of stock!
Maxtor DiamondMax Plus 9 160GB 160 GB 6Y160LO YAR41BWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160LO
Code: YAR41BWO
Capacity: 160GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160LO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001-8
This item is currently out of stock!
Maxtor DiamondMax Plus 9 200GB 200 GB 6Y200P0 YAR41BW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200P0
Code: YAR41BW0
Capacity: 200GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200P0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001-9
This item is currently out of stock!
Maxtor DiamondMax Plus 9 200GB 200 GB 6Y200LO YAR41BWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200LO
Code: YAR41BWO
Capacity: 200GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200LO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001-19
This item is currently out of stock!
Maxtor DiamondMax Plus 9 250GB 250 GB 6Y250P0 YAR41BW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250P0
Code: YAR41BW0
Capacity: 250GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250P0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001-11
This item is currently out of stock!
Maxtor DiamondMax Plus 9 250GB 250 GB 6Y250LO YAR41BWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250LO
Code: YAR41BWO
Capacity: 250GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250LO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001-12
This item is currently out of stock!
Maxtor DiamondMax Plus 9 60GB 60 GB 6Y060P0 YAR41VW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060P0
Code: YAR41VW0
Capacity: 60GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060P0".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001-50
This item is currently out of stock!
Maxtor DiamondMax Plus 9 60GB 60 GB 6Y060LO YAR41VWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060LO
Code: YAR41VWO
Capacity: 60GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060LO".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001-52
This item is currently out of stock!
Maxtor DiamondMax Plus 9 80GB 80 GB 6Y080P0 YAR41VW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080P0
Code: YAR41VW0
Capacity: 80GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080P0".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001-53
This item is currently out of stock!
Maxtor DiamondMax Plus 9 80GB 80 GB 6Y080LO YAR41VWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080LO
Code: YAR41VWO
Capacity: 80GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080LO".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001-54
This item is currently out of stock!
Maxtor DiamondMax Plus 9 120GB 120 GB 6Y120P0 YAR41VW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120P0
Code: YAR41VW0
Capacity: 120GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120P0".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001-55
This item is currently out of stock!
Maxtor DiamondMax Plus 9 120GB 120 GB 6Y120LO YAR41VWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120LO
Code: YAR41VWO
Capacity: 120GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120LO".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001-56
This item is currently out of stock!
Maxtor DiamondMax Plus 9 160GB 160 GB 6Y160P0 YAR41VW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160P0
Code: YAR41VW0
Capacity: 160GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160P0".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001-57
This item is currently out of stock!
Maxtor DiamondMax Plus 9 160GB 160 GB 6Y160LO YAR41VWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160LO
Code: YAR41VWO
Capacity: 160GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160LO".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001-58
This item is currently out of stock!
Maxtor DiamondMax Plus 9 200GB 200 GB 6Y200P0 YAR41VW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200P0
Code: YAR41VW0
Capacity: 200GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200P0".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001-59
This item is currently out of stock!
Maxtor DiamondMax Plus 9 200GB 200 GB 6Y200LO YAR41VWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200LO
Code: YAR41VWO
Capacity: 200GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200LO".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001-69
This item is currently out of stock!
Maxtor DiamondMax Plus 9 250GB 250 GB 6Y250P0 YAR41VW0 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250P0
Code: YAR41VW0
Capacity: 250GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250P0".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001-61
This item is currently out of stock!
Maxtor DiamondMax Plus 9 250GB 250 GB 6Y250LO YAR41VWO 040110200 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250LO
Code: YAR41VWO
Capacity: 250GB
Main Chip #: 040110200

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040110200.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250LO".
  5. This board has many firmware versions. By default, we ship you the most common one, but it is possible your board does not use this version. Please view the details about this issue by clicking here.
  6. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-990401102001-62
This item is currently out of stock!
Maxtor DiamondMax Plus 9 60GB 60 GB 6Y060P0 YAR41BW0 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060P0
Code: YAR41BW0
Capacity: 60GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060P0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9915001
This item is currently out of stock!
Maxtor DiamondMax Plus 9 60GB 60 GB 6Y060LO YAR41BWO 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060LO
Code: YAR41BWO
Capacity: 60GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060LO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9915001-2
This item is currently out of stock!
Maxtor DiamondMax Plus 9 80GB 80 GB 6Y080P0 YAR41BW0 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080P0
Code: YAR41BW0
Capacity: 80GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080P0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9915001-4
This item is currently out of stock!
Maxtor DiamondMax Plus 9 80GB 80 GB 6Y080LO YAR41BWO 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080LO
Code: YAR41BWO
Capacity: 80GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080LO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9915001-6
This item is currently out of stock!
Maxtor DiamondMax Plus 9 120GB 120 GB 6Y120P0 YAR41BW0 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120P0
Code: YAR41BW0
Capacity: 120GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120P0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9915001-8
This item is currently out of stock!
Maxtor DiamondMax Plus 9 120GB 120 GB 6Y120LO YAR41BWO 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120LO
Code: YAR41BWO
Capacity: 120GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120LO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9915001-10
This item is currently out of stock!
Maxtor DiamondMax Plus 9 160GB 160 GB 6Y160P0 YAR41BW0 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160P0
Code: YAR41BW0
Capacity: 160GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160P0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9915001-12
This item is currently out of stock!
Maxtor DiamondMax Plus 9 160GB 160 GB 6Y160LO YAR41BWO 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160LO
Code: YAR41BWO
Capacity: 160GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160LO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9915001-14
This item is currently out of stock!
Maxtor DiamondMax Plus 9 200GB 200 GB 6Y200P0 YAR41BW0 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200P0
Code: YAR41BW0
Capacity: 200GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200P0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9915001-16
This item is currently out of stock!
Maxtor DiamondMax Plus 9 200GB 200 GB 6Y200LO YAR41BWO 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200LO
Code: YAR41BWO
Capacity: 200GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200LO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9915001-18
This item is currently out of stock!
Maxtor DiamondMax Plus 9 250GB 250 GB 6Y250P0 YAR41BW0 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250P0
Code: YAR41BW0
Capacity: 250GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250P0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9915001-20
This item is currently out of stock!
Maxtor DiamondMax Plus 9 250GB 250 GB 6Y250LO YAR41BWO 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y250LO
Code: YAR41BWO
Capacity: 250GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41BWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y250LO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9915001-22
This item is currently out of stock!
Maxtor DiamondMax Plus 9 60GB 60 GB 6Y060P0 YAR41VW0 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060P0
Code: YAR41VW0
Capacity: 60GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060P0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9915001-50
This item is currently out of stock!
Maxtor DiamondMax Plus 9 60GB 60 GB 6Y060LO YAR41VWO 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y060LO
Code: YAR41VWO
Capacity: 60GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y060LO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9915001-52
This item is currently out of stock!
Maxtor DiamondMax Plus 9 80GB 80 GB 6Y080P0 YAR41VW0 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080P0
Code: YAR41VW0
Capacity: 80GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080P0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9915001-54
This item is currently out of stock!
Maxtor DiamondMax Plus 9 80GB 80 GB 6Y080LO YAR41VWO 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y080LO
Code: YAR41VWO
Capacity: 80GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y080LO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9915001-56
This item is currently out of stock!
Maxtor DiamondMax Plus 9 120GB 120 GB 6Y120P0 YAR41VW0 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120P0
Code: YAR41VW0
Capacity: 120GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120P0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9915001-58
This item is currently out of stock!
Maxtor DiamondMax Plus 9 120GB 120 GB 6Y120LO YAR41VWO 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y120LO
Code: YAR41VWO
Capacity: 120GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y120LO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9915001-60
This item is currently out of stock!
Maxtor DiamondMax Plus 9 160GB 160 GB 6Y160P0 YAR41VW0 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160P0
Code: YAR41VW0
Capacity: 160GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160P0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9915001-62
This item is currently out of stock!
Maxtor DiamondMax Plus 9 160GB 160 GB 6Y160LO YAR41VWO 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y160LO
Code: YAR41VWO
Capacity: 160GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VWO".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y160LO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9915001-64
This item is currently out of stock!
Maxtor DiamondMax Plus 9 200GB 200 GB 6Y200P0 YAR41VW0 040111500 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax Plus 9 ATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6Y200P0
Code: YAR41VW0
Capacity: 200GB
Main Chip #: 040111500

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040111500.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: YAR41VW0".
  4. The model number is the first 7 characters above the barcode on the bottom left, it should say "6Y200P0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
diamondmax-9915001-66
This item is currently out of stock!