Maxtor DiamondMax 10 SATA PCB

Item# maxtor-diamondmax-10-sata-hard-drive-pcb
Maxtor DiamondMax 10 320GB 320 G 6V320FO VA111630 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V320FO
Code: VA111630
Capacity: 320GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111630".
  4. The model number is located at the top right of the label, it should say "6V320FO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-001
This item is currently out of stock!
Maxtor DiamondMax 10 320GB 320 G 6V320FO VA111900 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V320FO
Code: VA111900
Capacity: 320GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111900".
  4. The model number is located at the top right of the label, it should say "6V320FO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-002
This item is currently out of stock!
Maxtor DiamondMax 10 300GB 300 G 6V300F0 VA111630 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V300F0
Code: VA111630
Capacity: 300GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111630".
  4. The model number is located at the top right of the label, it should say "6V300F0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-003
This item is currently out of stock!
Maxtor DiamondMax 10 300GB 300 G 6V300F0 VA111900 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V300F0
Code: VA111900
Capacity: 300GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111900".
  4. The model number is located at the top right of the label, it should say "6V300F0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-004
This item is currently out of stock!
Maxtor DiamondMax 10 250GB 250 G 6V250F0 VA111630 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V250F0
Code: VA111630
Capacity: 250GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111630".
  4. The model number is located at the top right of the label, it should say "6V250F0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-005
This item is currently out of stock!
Maxtor DiamondMax 10 250GB 250 G 6V250F0 VA111900 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V250F0
Code: VA111900
Capacity: 250GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111900".
  4. The model number is located at the top right of the label, it should say "6V250F0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-006
This item is currently out of stock!
Maxtor DiamondMax 10 200GB 200 G 6V200E0 VA111630 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V200E0
Code: VA111630
Capacity: 200GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111630".
  4. The model number is located at the top right of the label, it should say "6V200E0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-007
This item is currently out of stock!
Maxtor DiamondMax 10 200GB 200 G 6V200E0 VA111900 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V200E0
Code: VA111900
Capacity: 200GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111900".
  4. The model number is located at the top right of the label, it should say "6V200E0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-008
This item is currently out of stock!
Maxtor DiamondMax 10 160GB 160 G 6V160E0 VA111630 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V160E0
Code: VA111630
Capacity: 160GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111630".
  4. The model number is located at the top right of the label, it should say "6V160E0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-009
This item is currently out of stock!
Maxtor DiamondMax 10 160GB 160 G 6V160E0 VA111900 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V160E0
Code: VA111900
Capacity: 160GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111900".
  4. The model number is located at the top right of the label, it should say "6V160E0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-010
This item is currently out of stock!
Maxtor DiamondMax 10 80GB 80 G 6V080E0 VA111630 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V080E0
Code: VA111630
Capacity: 80GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111630".
  4. The model number is located at the top right of the label, it should say "6V080E0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-011
This item is currently out of stock!
Maxtor DiamondMax 10 80GB 80 G 6V080E0 VA111900 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V080E0
Code: VA111900
Capacity: 80GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111900".
  4. The model number is located at the top right of the label, it should say "6V080E0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-012
This item is currently out of stock!
Maxtor DiamondMax 10 320GB 320 G 6V320F0 VA111630 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V320F0
Code: VA111630
Capacity: 320GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111630".
  4. The model number is located at the top right of the label, it should say "6V320F0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-101
This item is currently out of stock!
Maxtor DiamondMax 10 320GB 320 G 6V320F0 6V320FO VA111670 SATA HDD PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V320F0 / 6V320FO
Code: VA111670
Capacity: 320GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111670".
  4. The model number is located at the top right of the label, it should say "6V320FO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-020
This item is currently out of stock!
Maxtor DiamondMax 10 320GB 320 G 6V320F0 6V320FO VA111680 SATA HDD PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V320F0 / 6V320FO
Code: VA111680
Capacity: 320GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111680".
  4. The model number is located at the top right of the label, it should say "6V320FO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-022
This item is currently out of stock!
Maxtor DiamondMax 10 300GB 300 G 6V300F0 6V300FO VA111670 SATA HDD PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V300F0 / 6V300FO
Code: VA111670
Capacity: 300GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111670".
  4. The model number is located at the top right of the label, it should say "6V300FO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-023
This item is currently out of stock!
Maxtor DiamondMax 10 300GB 300 G 6V300F0 6V300FO VA111680 SATA HDD PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V300F0 / 6V300FO
Code: VA111680
Capacity: 300GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111680".
  4. The model number is located at the top right of the label, it should say "6V300FO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-024
This item is currently out of stock!
Maxtor DiamondMax 10 250GB 250 G 6V250F0 6V250FO VA111670 SATA HDD PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V250F0 / 6V250FO
Code: VA111670
Capacity: 250GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111670".
  4. The model number is located at the top right of the label, it should say "6V250FO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-025
This item is currently out of stock!
Maxtor DiamondMax 10 250GB 250 G 6V250F0 6V250FO VA111680 SATA HDD PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V250F0 / 6V250FO
Code: VA111680
Capacity: 250GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111680".
  4. The model number is located at the top right of the label, it should say "6V250FO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-026
This item is currently out of stock!
Maxtor DiamondMax 10 200GB 200 G 6V200E0 6V200EO VA111670 SATA HDD PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V200E0 / 6V200EO
Code: VA111670
Capacity: 200GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111670".
  4. The model number is located at the top right of the label, it should say "6V200EO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-027
This item is currently out of stock!
Maxtor DiamondMax 10 200GB 200 G 6V200E0 6V200EO VA111680 SATA HDD PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V200E0 / 6V200EO
Code: VA111680
Capacity: 200GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111680".
  4. The model number is located at the top right of the label, it should say "6V200EO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-028
This item is currently out of stock!
Maxtor DiamondMax 10 160GB 160 G 6V160E0 6V160EO VA111670 SATA HDD PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V160E0 / 6V160EO
Code: VA111670
Capacity: 160GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111670".
  4. The model number is located at the top right of the label, it should say "6V160EO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-029
This item is currently out of stock!
Maxtor DiamondMax 10 160GB 160 G 6V160E0 6V160EO VA111680 SATA HDD PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V160E0 / 6V160EO
Code: VA111680
Capacity: 160GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111680".
  4. The model number is located at the top right of the label, it should say "6V160EO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-030
This item is currently out of stock!
Maxtor DiamondMax 10 80GB 80 G 6V080E0 6V080EO VA111670 SATA HDD PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V080E0 / 6V080EO
Code: VA111670
Capacity: 80GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111670".
  4. The model number is located at the top right of the label, it should say "6V080EO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-031
This item is currently out of stock!
Maxtor DiamondMax 10 80GB 80 G 6V080E0 6V080EO VA111680 SATA HDD PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V080E0 / 6V080EO
Code: VA111680
Capacity: 80GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111680".
  4. The model number is located at the top right of the label, it should say "6V080EO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-032
This item is currently out of stock!
Maxtor DiamondMax 10 320GB 320 G 6V320F0 VA111900 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V320F0
Code: VA111900
Capacity: 320GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111900".
  4. The model number is located at the top right of the label, it should say "6V320F0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-102
This item is currently out of stock!
Maxtor DiamondMax 10 80GB 80 G 6V080EO VA111630 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V080EO
Code: VA111630
Capacity: 80GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111630".
  4. The model number is located at the top right of the label, it should say "6V080EO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-051
This item is currently out of stock!
Maxtor DiamondMax 10 80GB 80 G 6V080EO VA111900 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V080EO
Code: VA111900
Capacity: 80GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111900".
  4. The model number is located at the top right of the label, it should say "6V080EO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-052
This item is currently out of stock!
Maxtor DiamondMax 10 160GB 160 G 6V160EO VA111630 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V160EO
Code: VA111630
Capacity: 160GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111630".
  4. The model number is located at the top right of the label, it should say "6V160EO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-053
This item is currently out of stock!
Maxtor DiamondMax 10 160GB 160 G 6V160EO VA111900 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V160EO
Code: VA111900
Capacity: 160GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111900".
  4. The model number is located at the top right of the label, it should say "6V160EO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-054
This item is currently out of stock!
Maxtor DiamondMax 10 200GB 200 G 6V200EO VA111630 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V200EO
Code: VA111630
Capacity: 200GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111630".
  4. The model number is located at the top right of the label, it should say "6V200EO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-055
This item is currently out of stock!
Maxtor DiamondMax 10 200GB 200 G 6V200EO VA111900 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V200EO
Code: VA111900
Capacity: 200GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111900".
  4. The model number is located at the top right of the label, it should say "6V200EO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-056
This item is currently out of stock!
Maxtor DiamondMax 10 250GB 250 G 6V250FO VA111630 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V250FO
Code: VA111630
Capacity: 250GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111630".
  4. The model number is located at the top right of the label, it should say "6V250FO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-057
This item is currently out of stock!
Maxtor DiamondMax 10 250GB 250 G 6V250FO VA111900 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V250FO
Code: VA111900
Capacity: 250GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111900".
  4. The model number is located at the top right of the label, it should say "6V250FO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-058
This item is currently out of stock!
Maxtor DiamondMax 10 300GB 300 G 6V300FO VA111630 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V300FO
Code: VA111630
Capacity: 300GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111630".
  4. The model number is located at the top right of the label, it should say "6V300FO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-059
This item is currently out of stock!
Maxtor DiamondMax 10 300GB 300 G 6V300FO VA111900 SATA Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6V300FO
Code: VA111900
Capacity: 300GB
Main Chip #: 040128000

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040128000.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: VA111900".
  4. The model number is located at the top right of the label, it should say "6V300FO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-6v-sata-060
This item is currently out of stock!
Maxtor DiamondMax 10 80 80GB SATA 6L080M0 BACE1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L080M0
Code: BACE1G10
Capacity: 80GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L080M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-101
This item is currently out of stock!
Maxtor DiamondMax 10 80 80GB SATA 6L080M0 BACE1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L080M0
Code: BACE1G10
Capacity: 80GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L080M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-001
Maxtor DiamondMax 10 80 80GB SATA 6L080MO BACE1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L080MO
Code: BACE1G10
Capacity: 80GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L080MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-002
Maxtor DiamondMax 10 80 80GB SATA 6L080M0 BACE1G20 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L080M0
Code: BACE1G20
Capacity: 80GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L080M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-003
Maxtor DiamondMax 10 80 80GB SATA 6L080MO BACE1G20 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L080MO
Code: BACE1G20
Capacity: 80GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L080MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-004
Maxtor DiamondMax 10 80 80GB SATA 6L080M0 BANC1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L080M0
Code: BANC1G10
Capacity: 80GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L080M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-005
Maxtor DiamondMax 10 80 80GB SATA 6L080MO BANC1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L080MO
Code: BANC1G10
Capacity: 80GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L080MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-006
Maxtor DiamondMax 10 80 80GB SATA 6L080M0 6L080MO BANC1E00 040125400 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L080M0 / 6L080MO
Code: BANC1E00
Capacity: 80GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E00".
  4. The model number is located at the top right of the label, it should say "6L080MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-007
Maxtor DiamondMax 10 80 80GB SATA 6L080M0 6L080MO BANC1E50 040125400 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L080M0 / 6L080MO
Code: BANC1E50
Capacity: 80GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E50".
  4. The model number is located at the top right of the label, it should say "6L080MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-008
Maxtor DiamondMax 10 120 120GB SATA 6L120M0 BACE1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L120M0
Code: BACE1G10
Capacity: 120GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L120M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-009
Maxtor DiamondMax 10 120 120GB SATA 6L120MO BACE1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L120MO
Code: BACE1G10
Capacity: 120GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L120MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-010
Maxtor DiamondMax 10 120 120GB SATA 6L120M0 BACE1G20 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L120M0
Code: BACE1G20
Capacity: 120GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L120M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-011
Maxtor DiamondMax 10 120 120GB SATA 6L120MO BACE1G20 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L120MO
Code: BACE1G20
Capacity: 120GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L120MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-012
Maxtor DiamondMax 10 120 120GB SATA 6L120M0 BANC1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L120M0
Code: BANC1G10
Capacity: 120GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L120M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-013
Maxtor DiamondMax 10 120 120GB SATA 6L120MO BANC1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L120MO
Code: BANC1G10
Capacity: 120GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L120MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-014
Maxtor DiamondMax 10 120 120GB SATA 6L120M0 6L120MO BANC1E00 040125400 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L120M0 / 6L120MO
Code: BANC1E00
Capacity: 120GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E00".
  4. The model number is located at the top right of the label, it should say "6L120MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-015
Maxtor DiamondMax 10 120 120GB SATA 6L120M0 6L120MO BANC1E50 040125400 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L120M0 / 6L120MO
Code: BANC1E50
Capacity: 120GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E50".
  4. The model number is located at the top right of the label, it should say "6L120MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-016
Maxtor DiamondMax 10 160 160GB SATA 6L160M0 BACE1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L160M0
Code: BACE1G10
Capacity: 160GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L160M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-017
Maxtor DiamondMax 10 160 160GB SATA 6L160MO BACE1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L160MO
Code: BACE1G10
Capacity: 160GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L160MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-018
Maxtor DiamondMax 10 160 160GB SATA 6L160M0 BACE1G20 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L160M0
Code: BACE1G20
Capacity: 160GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L160M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-019
Maxtor DiamondMax 10 160 160GB SATA 6L160MO BACE1G20 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L160MO
Code: BACE1G20
Capacity: 160GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L160MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-020
Maxtor DiamondMax 10 160 160GB SATA 6L160M0 BANC1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L160M0
Code: BANC1G10
Capacity: 160GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L160M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-021
Maxtor DiamondMax 10 160 160GB SATA 6L160MO BANC1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L160MO
Code: BANC1G10
Capacity: 160GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L160MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-022
Maxtor DiamondMax 10 160 160GB SATA 6L160M0 6L160MO BANC1E00 040125400 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L160M0 / 6L160MO
Code: BANC1E00
Capacity: 160GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E00".
  4. The model number is located at the top right of the label, it should say "6L160MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-023
Maxtor DiamondMax 10 160 160GB SATA 6L160M0 6L160MO BANC1E50 040125400 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L160M0 / 6L160MO
Code: BANC1E50
Capacity: 160GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E50".
  4. The model number is located at the top right of the label, it should say "6L160MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-024
Maxtor DiamondMax 10 200 200GB SATA 6L200M0 BACE1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200M0
Code: BACE1G10
Capacity: 200GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L200M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-025
Maxtor DiamondMax 10 200 200GB SATA 6L200MO BACE1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200MO
Code: BACE1G10
Capacity: 200GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L200MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-026
Maxtor DiamondMax 10 200 200GB SATA 6L200M0 BACE1G20 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200M0
Code: BACE1G20
Capacity: 200GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L200M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-027
Maxtor DiamondMax 10 200 200GB SATA 6L200MO BACE1G20 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200MO
Code: BACE1G20
Capacity: 200GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L200MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-028
Maxtor DiamondMax 10 200 200GB SATA 6L200M0 BANC1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200M0
Code: BANC1G10
Capacity: 200GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L200M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-029
Maxtor DiamondMax 10 200 200GB SATA 6L200MO BANC1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200MO
Code: BANC1G10
Capacity: 200GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L200MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-030
Maxtor DiamondMax 10 200 200GB SATA 6L200M0 6L200MO BANC1E00 040125400 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200M0 / 6L200MO
Code: BANC1E00
Capacity: 200GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E00".
  4. The model number is located at the top right of the label, it should say "6L200MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-031
Maxtor DiamondMax 10 200 200GB SATA 6L200M0 6L200MO BANC1E50 040125400 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200M0 / 6L200MO
Code: BANC1E50
Capacity: 200GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E50".
  4. The model number is located at the top right of the label, it should say "6L200MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-032
Maxtor DiamondMax 10 250 250GB SATA 6L250S0 BACE1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L250S0
Code: BACE1G10
Capacity: 250GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L250S0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-033
Maxtor DiamondMax 10 250 250GB SATA 6L250SO BACE1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L250SO
Code: BACE1G10
Capacity: 250GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L250SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-034
Maxtor DiamondMax 10 250 250GB SATA 6L250S0 BACE1G20 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L250S0
Code: BACE1G20
Capacity: 250GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L250S0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-035
Maxtor DiamondMax 10 250 250GB SATA 6L250SO BACE1G20 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L250SO
Code: BACE1G20
Capacity: 250GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L250SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-036
Maxtor DiamondMax 10 250 250GB SATA 6L250S0 BANC1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L250S0
Code: BANC1G10
Capacity: 250GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L250S0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-037
Maxtor DiamondMax 10 250 250GB SATA 6L250SO BANC1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L250SO
Code: BANC1G10
Capacity: 250GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L250SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-038
Maxtor DiamondMax 10 250 250GB SATA 6L250S0 6L250SO BANC1E00 040125400 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L250S0 / 6L250SO
Code: BANC1E00
Capacity: 250GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E00".
  4. The model number is located at the top right of the label, it should say "6L250SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-039
Maxtor DiamondMax 10 250 250GB SATA 6L250S0 6L250SO BANC1E50 040125400 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L250S0 / 6L250SO
Code: BANC1E50
Capacity: 250GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E50".
  4. The model number is located at the top right of the label, it should say "6L250SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-040
Maxtor DiamondMax 10 300 300GB SATA 6L300S0 BACE1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L300S0
Code: BACE1G10
Capacity: 300GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L300S0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-041
Maxtor DiamondMax 10 300 300GB SATA 6L300SO BACE1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L300SO
Code: BACE1G10
Capacity: 300GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L300SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-042
Maxtor DiamondMax 10 300 300GB SATA 6L300S0 BACE1G20 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L300S0
Code: BACE1G20
Capacity: 300GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L300S0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-043
Maxtor DiamondMax 10 300 300GB SATA 6L300SO BACE1G20 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L300SO
Code: BACE1G20
Capacity: 300GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L300SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-044
Maxtor DiamondMax 10 300 300GB SATA 6L300S0 BANC1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L300S0
Code: BANC1G10
Capacity: 300GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L300S0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-045
Maxtor DiamondMax 10 300 300GB SATA 6L300SO BANC1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L300SO
Code: BANC1G10
Capacity: 300GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L300SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-046
Maxtor DiamondMax 10 300 300GB SATA 6L300S0 6L300SO BANC1E00 040125400 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L300S0 / 6L300SO
Code: BANC1E00
Capacity: 300GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E00".
  4. The model number is located at the top right of the label, it should say "6L300SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-047
Maxtor DiamondMax 10 300 300GB SATA 6L300S0 6L300SO BANC1E50 040125400 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L300S0 / 6L300SO
Code: BANC1E50
Capacity: 300GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E50".
  4. The model number is located at the top right of the label, it should say "6L300SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-048
Maxtor DiamondMax 10 80 80GB SATA 6L080MO BACE1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L080MO
Code: BACE1G10
Capacity: 80GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L080MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-102
This item is currently out of stock!
Maxtor DiamondMax 10 80 80GB SATA 6L080M0 BACE1G20 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L080M0
Code: BACE1G20
Capacity: 80GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L080M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-103
This item is currently out of stock!
Maxtor DiamondMax 10 80 80GB SATA 6L080MO BACE1G20 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L080MO
Code: BACE1G20
Capacity: 80GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L080MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-104
This item is currently out of stock!
Maxtor DiamondMax 10 80 80GB SATA 6L080M0 BANC1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L080M0
Code: BANC1G10
Capacity: 80GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L080M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-105
This item is currently out of stock!
Maxtor DiamondMax 10 80 80GB SATA 6L080MO BANC1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L080MO
Code: BANC1G10
Capacity: 80GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L080MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-106
This item is currently out of stock!
Maxtor DiamondMax 10 80 80GB SATA 6L080M0 6L080MO BANC1E00 040121300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L080M0 / 6L080MO
Code: BANC1E00
Capacity: 80GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E00".
  4. The model number is located at the top right of the label, it should say "6L080MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-107
This item is currently out of stock!
Maxtor DiamondMax 10 80 80GB SATA 6L080M0 6L080MO BANC1E50 040121300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L080M0 / 6L080MO
Code: BANC1E50
Capacity: 80GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E50".
  4. The model number is located at the top right of the label, it should say "6L080MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-108
This item is currently out of stock!
Maxtor DiamondMax 10 120 120GB SATA 6L120M0 BACE1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L120M0
Code: BACE1G10
Capacity: 120GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L120M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-109
This item is currently out of stock!
Maxtor DiamondMax 10 120 120GB SATA 6L120MO BACE1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L120MO
Code: BACE1G10
Capacity: 120GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L120MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-010
This item is currently out of stock!
Maxtor DiamondMax 10 120 120GB SATA 6L120M0 BACE1G20 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L120M0
Code: BACE1G20
Capacity: 120GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L120M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-011
This item is currently out of stock!
Maxtor DiamondMax 10 120 120GB SATA 6L120MO BACE1G20 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L120MO
Code: BACE1G20
Capacity: 120GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L120MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-012
This item is currently out of stock!
Maxtor DiamondMax 10 120 120GB SATA 6L120M0 BANC1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L120M0
Code: BANC1G10
Capacity: 120GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L120M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-013
This item is currently out of stock!
Maxtor DiamondMax 10 120 120GB SATA 6L120MO BANC1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L120MO
Code: BANC1G10
Capacity: 120GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L120MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-014
This item is currently out of stock!
Maxtor DiamondMax 10 120 120GB SATA 6L120M0 6L120MO BANC1E00 040121300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L120M0 / 6L120MO
Code: BANC1E00
Capacity: 120GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E00".
  4. The model number is located at the top right of the label, it should say "6L120MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-015
This item is currently out of stock!
Maxtor DiamondMax 10 120 120GB SATA 6L120M0 6L120MO BANC1E50 040121300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L120M0 / 6L120MO
Code: BANC1E50
Capacity: 120GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E50".
  4. The model number is located at the top right of the label, it should say "6L120MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-016
This item is currently out of stock!
Maxtor DiamondMax 10 160 160GB SATA 6L160M0 BACE1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L160M0
Code: BACE1G10
Capacity: 160GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L160M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-017
This item is currently out of stock!
Maxtor DiamondMax 10 160 160GB SATA 6L160MO BACE1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L160MO
Code: BACE1G10
Capacity: 160GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L160MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-018
This item is currently out of stock!
Maxtor DiamondMax 10 160 160GB SATA 6L160M0 BACE1G20 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L160M0
Code: BACE1G20
Capacity: 160GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L160M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-019
This item is currently out of stock!
Maxtor DiamondMax 10 160 160GB SATA 6L160MO BACE1G20 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L160MO
Code: BACE1G20
Capacity: 160GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L160MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-020
This item is currently out of stock!
Maxtor DiamondMax 10 160 160GB SATA 6L160M0 BANC1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L160M0
Code: BANC1G10
Capacity: 160GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L160M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-021
This item is currently out of stock!
Maxtor DiamondMax 10 160 160GB SATA 6L160MO BANC1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L160MO
Code: BANC1G10
Capacity: 160GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L160MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-022
This item is currently out of stock!
Maxtor DiamondMax 10 160 160GB SATA 6L160M0 6L160MO BANC1E00 040121300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L160M0 / 6L160MO
Code: BANC1E00
Capacity: 160GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E00".
  4. The model number is located at the top right of the label, it should say "6L160MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-023
This item is currently out of stock!
Maxtor DiamondMax 10 160 160GB SATA 6L160M0 6L160MO BANC1E50 040121300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L160M0 / 6L160MO
Code: BANC1E50
Capacity: 160GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E50".
  4. The model number is located at the top right of the label, it should say "6L160MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-024
This item is currently out of stock!
Maxtor DiamondMax 10 200 200GB SATA 6L200M0 BACE1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200M0
Code: BACE1G10
Capacity: 200GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L200M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-025
This item is currently out of stock!
Maxtor DiamondMax 10 200 200GB SATA 6L200MO BACE1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200MO
Code: BACE1G10
Capacity: 200GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L200MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-026
This item is currently out of stock!
Maxtor DiamondMax 10 200 200GB SATA 6L200M0 BACE1G20 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200M0
Code: BACE1G20
Capacity: 200GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L200M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-027
This item is currently out of stock!
Maxtor DiamondMax 10 200 200GB SATA 6L200MO BACE1G20 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200MO
Code: BACE1G20
Capacity: 200GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L200MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-028
This item is currently out of stock!
Maxtor DiamondMax 10 200 200GB SATA 6L200M0 BANC1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200M0
Code: BANC1G10
Capacity: 200GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L200M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-029
This item is currently out of stock!
Maxtor DiamondMax 10 200 200GB SATA 6L200MO BANC1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200MO
Code: BANC1G10
Capacity: 200GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L200MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-030
This item is currently out of stock!
Maxtor DiamondMax 10 200 200GB SATA 6L200M0 6L200MO BANC1E00 040121300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200M0 / 6L200MO
Code: BANC1E00
Capacity: 200GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E00".
  4. The model number is located at the top right of the label, it should say "6L200MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-031
This item is currently out of stock!
Maxtor DiamondMax 10 200 200GB SATA 6L200M0 6L200MO BANC1E50 040121300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200M0 / 6L200MO
Code: BANC1E50
Capacity: 200GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E50".
  4. The model number is located at the top right of the label, it should say "6L200MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-032
This item is currently out of stock!
Maxtor DiamondMax 10 250 250GB SATA 6L250S0 BACE1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L250S0
Code: BACE1G10
Capacity: 250GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L250S0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-033
This item is currently out of stock!
Maxtor DiamondMax 10 250 250GB SATA 6L250SO BACE1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L250SO
Code: BACE1G10
Capacity: 250GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L250SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-034
This item is currently out of stock!
Maxtor DiamondMax 10 250 250GB SATA 6L250S0 BACE1G20 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L250S0
Code: BACE1G20
Capacity: 250GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L250S0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-035
This item is currently out of stock!
Maxtor DiamondMax 10 250 250GB SATA 6L250SO BACE1G20 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L250SO
Code: BACE1G20
Capacity: 250GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L250SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-036
This item is currently out of stock!
Maxtor DiamondMax 10 250 250GB SATA 6L250S0 BANC1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L250S0
Code: BANC1G10
Capacity: 250GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L250S0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-037
This item is currently out of stock!
Maxtor DiamondMax 10 250 250GB SATA 6L250SO BANC1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L250SO
Code: BANC1G10
Capacity: 250GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L250SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-038
This item is currently out of stock!
Maxtor DiamondMax 10 250 250GB SATA 6L250S0 6L250SO BANC1E00 040121300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L250S0 / 6L250SO
Code: BANC1E00
Capacity: 250GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E00".
  4. The model number is located at the top right of the label, it should say "6L250SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-039
This item is currently out of stock!
Maxtor DiamondMax 10 250 250GB SATA 6L250S0 6L250SO BANC1E50 040121300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L250S0 / 6L250SO
Code: BANC1E50
Capacity: 250GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E50".
  4. The model number is located at the top right of the label, it should say "6L250SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-040
This item is currently out of stock!
Maxtor DiamondMax 10 300 300GB SATA 6L300S0 BACE1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L300S0
Code: BACE1G10
Capacity: 300GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L300S0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-041
This item is currently out of stock!
Maxtor DiamondMax 10 300 300GB SATA 6L300SO BACE1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L300SO
Code: BACE1G10
Capacity: 300GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L300SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-042
This item is currently out of stock!
Maxtor DiamondMax 10 300 300GB SATA 6L300S0 BACE1G20 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L300S0
Code: BACE1G20
Capacity: 300GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L300S0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-043
This item is currently out of stock!
Maxtor DiamondMax 10 300 300GB SATA 6L300SO BACE1G20 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L300SO
Code: BACE1G20
Capacity: 300GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L300SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-044
This item is currently out of stock!
Maxtor DiamondMax 10 300 300GB SATA 6L300S0 BANC1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L300S0
Code: BANC1G10
Capacity: 300GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L300S0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-045
This item is currently out of stock!
Maxtor DiamondMax 10 300 300GB SATA 6L300SO BANC1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L300SO
Code: BANC1G10
Capacity: 300GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L300SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-046
This item is currently out of stock!
Maxtor DiamondMax 10 300 300GB SATA 6L300S0 6L300SO BANC1E00 040121300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L300S0 / 6L300SO
Code: BANC1E00
Capacity: 300GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E00".
  4. The model number is located at the top right of the label, it should say "6L300SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-047
This item is currently out of stock!
Maxtor DiamondMax 10 300 300GB SATA 6L300S0 6L300SO BANC1E50 040121300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L300S0 / 6L300SO
Code: BANC1E50
Capacity: 300GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E50".
  4. The model number is located at the top right of the label, it should say "6L300SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-048
This item is currently out of stock!
Maxtor DiamondMax 10 100 100GB SATA 6L100M0 BACE1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L100M0
Code: BACE1G10
Capacity: 100GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L100M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-050
Maxtor DiamondMax 10 100 100GB SATA 6L100MO BACE1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L100MO
Code: BACE1G10
Capacity: 100GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L100MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-051
Maxtor DiamondMax 10 100 100GB SATA 6L100M0 BACE1G20 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L100M0
Code: BACE1G20
Capacity: 100GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L100M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-052
Maxtor DiamondMax 10 100 100GB SATA 6L100MO BACE1G20 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L100MO
Code: BACE1G20
Capacity: 100GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L100MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-053
Maxtor DiamondMax 10 100 100GB SATA 6L100M0 BANC1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L100M0
Code: BANC1G10
Capacity: 100GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L100M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-054
Maxtor DiamondMax 10 100 100GB SATA 6L100MO BANC1G10 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L100MO
Code: BANC1G10
Capacity: 100GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L100MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-055
Maxtor DiamondMax 10 100 100GB SATA 6L100M0 6L100MO BANC1E00 040125400 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L100M0 / 6L100MO
Code: BANC1E00
Capacity: 100GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E00".
  4. The model number is located at the top right of the label, it should say "6L100MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-056
Maxtor DiamondMax 10 100 100GB SATA 6L100M0 6L100MO BANC1E50 040125400 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L100M0 / 6L100MO
Code: BANC1E50
Capacity: 100GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E50".
  4. The model number is located at the top right of the label, it should say "6L100MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-diamondmax-10-sata-5400-057
Maxtor Maxline III 300 300GB SATA 7L300S0 BACE1G20 040125400 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor Maxline III SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 7L300S0
Code: BACE1G20
Capacity: 300GB
Main Chip #: 040125400

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040125400.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "7L300S0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

Regular price: $39.99
Sale price: $35.99
maxtor-maxline-3-sata-5400-001
Maxtor DiamondMax 10 200 200GB SATA 6L200S0 BACE1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200S0
Code: BACE1G10
Capacity: 200GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L200S0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-050
This item is currently out of stock!
Maxtor DiamondMax 10 200 200GB SATA 6L200SO BACE1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200SO
Code: BACE1G10
Capacity: 200GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L200SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-051
This item is currently out of stock!
Maxtor DiamondMax 10 200 200GB SATA 6L200S0 BACE1G20 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200S0
Code: BACE1G20
Capacity: 200GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L200S0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-052
This item is currently out of stock!
Maxtor DiamondMax 10 200 200GB SATA 6L200SO BACE1G20 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200SO
Code: BACE1G20
Capacity: 200GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L200SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-053
This item is currently out of stock!
Maxtor DiamondMax 10 200 200GB SATA 6L200S0 BANC1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200S0
Code: BANC1G10
Capacity: 200GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L200S0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-054
This item is currently out of stock!
Maxtor DiamondMax 10 200 200GB SATA 6L200SO BANC1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200SO
Code: BANC1G10
Capacity: 200GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L200SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-055
This item is currently out of stock!
Maxtor DiamondMax 10 200 200GB SATA 6L200S0 6L200SO BANC1E00 040121300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200S0 / 6L200SO
Code: BANC1E00
Capacity: 200GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E00".
  4. The model number is located at the top right of the label, it should say "6L200SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-056
This item is currently out of stock!
Maxtor DiamondMax 10 200 200GB SATA 6L200S0 6L200SO BANC1E50 040121300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L200S0 / 6L200SO
Code: BANC1E50
Capacity: 200GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E50".
  4. The model number is located at the top right of the label, it should say "6L200SO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-057
This item is currently out of stock!
Maxtor DiamondMax 10 100 100GB SATA 6L100M0 BACE1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L100M0
Code: BACE1G10
Capacity: 100GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L100M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-1091
This item is currently out of stock!
Maxtor DiamondMax 10 100 100GB SATA 6L100MO BACE1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L100MO
Code: BACE1G10
Capacity: 100GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L100MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-0101
This item is currently out of stock!
Maxtor DiamondMax 10 100 100GB SATA 6L100M0 BACE1G20 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L100M0
Code: BACE1G20
Capacity: 100GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L100M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-0111
This item is currently out of stock!
Maxtor DiamondMax 10 100 100GB SATA 6L100MO BACE1G20 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L100MO
Code: BACE1G20
Capacity: 100GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L100MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-0121
This item is currently out of stock!
Maxtor DiamondMax 10 100 100GB SATA 6L100M0 BANC1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L100M0
Code: BANC1G10
Capacity: 100GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L100M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-0131
This item is currently out of stock!
Maxtor DiamondMax 10 100 100GB SATA 6L100MO BANC1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L100MO
Code: BANC1G10
Capacity: 100GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1G10".
  4. The model number is located at the top right of the label, it should say "6L100MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-0141
This item is currently out of stock!
Maxtor DiamondMax 10 100 100GB SATA 6L100M0 6L100MO BANC1E00 040121300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L100M0 / 6L100MO
Code: BANC1E00
Capacity: 100GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E00".
  4. The model number is located at the top right of the label, it should say "6L100MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-0151
This item is currently out of stock!
Maxtor DiamondMax 10 100 100GB SATA 6L100M0 6L100MO BANC1E50 040121300 Hard Drive PCB

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L100M0 / 6L100MO
Code: BANC1E50
Capacity: 100GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BANC1E50".
  4. The model number is located at the top right of the label, it should say "6L100MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-1300-0161
This item is currently out of stock!
Maxtor DiamondMax 10 250 250GB SATA 6L250M0 BACE1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L250M0
Code: BACE1G10
Capacity: 250GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L250M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-21300-033
This item is currently out of stock!
Maxtor DiamondMax 10 250 250GB SATA 6L250MO BACE1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L250MO
Code: BACE1G10
Capacity: 250GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G10".
  4. The model number is located at the top right of the label, it should say "6L250MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-21300-034
This item is currently out of stock!
Maxtor DiamondMax 10 250 250GB SATA 6L250M0 BACE1G20 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L250M0
Code: BACE1G20
Capacity: 250GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L250M0".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-21300-035
This item is currently out of stock!
Maxtor DiamondMax 10 250 250GB SATA 6L250MO BACE1G20 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L250MO
Code: BACE1G20
Capacity: 250GB
Main Chip #: 040121300

  1. Locate the largest chip on your PCB board. (Circled red in the picture)
  2. On this chip, there should be a row of numbers that says 040121300.
  3. On the label side of the drive, near the bottom left hand side, there should be a line that says "Code: BACE1G20".
  4. The model number is located at the top right of the label, it should say "6L250MO".
  5. If you have gotten to this step, then this PCB board is a match for your drive.
What to do if PCB is NOT a match for your drive / if you are not sure:

Option 1: Contact us through our online form by clicking here, we will try our best to locate the correct PCB for you, and reply within 12 hours.
Option 2: Try using our interactive online guide by clicking here.

Item Includes: circuit board, torx screwdriver and installation instruction sheet

ADDITIONAL INFORMATION

What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.


Please Note:
1. This is just the board, not the whole hard drive.
2. All boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.


Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs


Shipping Policy:
Click here for detailed information


Closing Comments

Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at info@onepcbsolution.com. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!

$39.99
maxtor-diamondmax-10-sata-21300-036
This item is currently out of stock!
Maxtor DiamondMax 10 250 250GB SATA 6L250M0 BANC1G10 040121300 Hard Drive PCB Board

This is the PCB board (circuit board) of a Maxtor DiamondMax 10 SATA Hard Drive

ESSENTIAL INFORMATION

Item Information

How to Use this Information

Model: 6L250M0
Code: BANC1G10
Capacity: 250GB
Main Chip #: 040121300